Erinn's Helicopter
by: Erinn M (over 10 years ago)



Project #88

1368 Views
Description

Directions:

1. Modify design of template at right by adjusting locations of solid black cut lines.

2. Cut along drawn cut lines.

3. Measure dimensions 1-5 and enter measurement in table. Each small square is 2 mm on edge while each large square is 10 mm on edge.

4. Fold along dotted lines as shown below.

5. Attach paper clip(s) to bottom.

6. Drop from a consistent height and measure flight times.

7. Repeat drop five times and record results.

8. Enter results into iSense.

9. Analyze results with iSense.

Data Sets
A18618f8f2bddab625f15159f6dda5aa
Fields
Name Units Type
Base Width
mm
Number
Base Height
mm
Number
Blade Width
mm
Number
Blade Length
mm
Number
Fold Length
mm
Number
Drop Height
mm
Number
Drop Time
s
Number
Formula Fields
Contribute Data
Please log in to contribute data
Media
Visualizations

Erinn's Helicopter

Project #88 on iSENSEProject.org


Description

Directions:

1. Modify design of template at right by adjusting locations of solid black cut lines.

2. Cut along drawn cut lines.

3. Measure dimensions 1-5 and enter measurement in table. Each small square is 2 mm on edge while each large square is 10 mm on edge.

4. Fold along dotted lines as shown below.

5. Attach paper clip(s) to bottom.

6. Drop from a consistent height and measure flight times.

7. Repeat drop five times and record results.

8. Enter results into iSense.

9. Analyze results with iSense.


Fields
Name Units Type of Data
Base Width
mm
Number
Base Height
mm
Number
Blade Width
mm
Number
Blade Length
mm
Number
Fold Length
mm
Number
Drop Height
mm
Number
Drop Time
s
Number

Our Data
Name(s): ______________________________________
Date: _________________________________________

Base Width Base Height Blade Width Blade Length Fold Length Drop Height Drop Time