Project #85 on iSENSEProject.org
Directions:
1. Modify design of template at right by adjusting locations of solid black cut lines.
2. Cut along drawn cut lines.
3. Measure dimensions 1-5 and enter measurement in table. Each small square is 2 mm on edge while each large square is 10 mm on edge.
4. Fold along dotted lines as shown below.
5. Attach paper clip(s) to bottom.
6. Drop from a consistent height and measure flight times.
7. Repeat drop five times and record results.
8. Enter results into iSense.
9. Analyze results with iSense.
| Name | Units | Type of Data |
|---|---|---|
|
Base Width
|
mm
|
Number
|
|
Base Height
|
mm
|
Number
|
|
Blade Width
|
mm
|
Number
|
|
Blade Length
|
mm
|
Number
|
|
Fold Length
|
mm
|
Number
|
|
Drop Height
|
mm
|
Number
|
|
Drop Time
|
s
|
Number
|
| Base Width | Base Height | Blade Width | Blade Length | Fold Length | Drop Height | Drop Time |